Banner

News

Monday | 03 February, 2014 | 2:01 pm

Steel Technologies de Mexico installs five Red Bud processing lines

Steel Technologies de Mexico, recently installed five new Red Bud Industries’ processing lines, four of which were installed at their greenfield site in Pesqueria, NL, Mexico.  The fifth line was installed at a new greenfield site in Celaya, GTO., Mexico.

Thursday | 30 January, 2014 | 2:24 pm

Mazak Webinar: Process planning for improved multi-tasking machining

Free Mazak Webinar, February 18, 2014: Process planning for improved multi-tasking machining. Presented by Derek Patrick, ESPRIT application engineer, DP Technology.

Wednesday | 22 January, 2014 | 9:27 am

Penn Stainless announces strategic alliance with Lehigh University

Penn Stainless Products and Lehigh University have announced a collaborative effort to provide metal consumers with access to the expertise in Lehigh’s Materials Science and Engineering Department.

Tuesday | 21 January, 2014 | 9:10 am

Samuel, Son & Co., Limited receives GM Supplier Quality Excellence Award

General Motors Co., one of the world’s largest auto makers, recently awarded Samuel, Son & Co., Limited with its distinguished GM Supplier Quality Excellence Award.

Friday | 17 January, 2014 | 9:53 am

Rolled Alloys announces expansion of 17-4 round bar product range

17-4 round bar is now carried in sizes from 3/16 in. to 12 in. diameter in standard lengths or cut to size.  Multiple heat treatment conditions are available as well. Rolled Alloys also inventories 17-4 stainless in plate and welding consumables.

Wednesday | 15 January, 2014 | 9:18 am

Hypertherm transitions to a 100 percent employee-owned company

Hypertherm announced the transfer of all its common stock into an Employee Stock Ownership Plan, making the company 100 percent employee owned under an S-Corporation structure.

Friday | 10 January, 2014 | 2:35 pm

Mississippi Steel Processing orders Red Bud precision blanking line

Mississippi Steel Processing, Columbus, Miss., has ordered a precision blanking line from Red Bud Industries which will be installed in late April 2014.

Wednesday | 08 January, 2014 | 9:08 am

Butech Bliss selected to build Fulton County Processing’s new HCL pickling line

Fulton County Processing, a northwest Ohio-based, state-of-the-art steel coil processing company, has announced that Butech Bliss will be installing a new hydrochloric push/pull pickling line set to be operational in late 2014.

Tuesday | 07 January, 2014 | 10:37 am

Samuel, Son & Co. expands operations in Midwest

Samuel Midwest is pleased to announce the opening of a new 65,000 sq. ft. facility in Chicago offering customers a broader selection of products and services. Located at 900 East 103rd Street.

Friday | 25 October, 2013 | 10:08 am

OMAX Corp. names Aqua Machinery exclusive distribution partner for Mexico

OMAX Corp. has signed an exclusive distribution agreement with Aqua Machinery SA de CV to market, sell and support premium OMAX JetMachining Centers and versatile MAXIEM JetCutting Centers in Mexico.

Thursday | 19 September, 2013 | 7:43 am

ESAB to host plasma cutting webinar

ESAB Cutting Systems will host a free Webinar entitled CNC Plasma Cutting Machines: Water Tables vs. Downdraft Tables on Wednesday, October 9, 2013 from 1:00 PM to 2:00 PM EDT.

Wednesday | 18 September, 2013 | 9:16 am

Seminar addresses shortage of skilled manufacturing professionals

A growing shortage of skilled manufacturing professionals is one of the biggest threats facing America’s manufacturing industries. This pressing topic will be addressed during a special “Workforce Tools and Applications” seminar, 11:20-1 p.m. Thursday, Oct. 10 at Jet Edge, Inc., 12070 43rd Street N.E., St. Michael, Minn.

Wednesday | 18 September, 2013 | 8:31 am

Marmon/Keystone holds company-wide celebration

To honor employees’ participation in the Quality Improvement Process over the past year, all of Marmon/Keystone’s 30 locations across the United States each gathered for an afternoon of recreational outings, team building and prize giveaways on Friday, September 13.

Monday | 16 September, 2013 | 3:34 pm

NASA adds five new metal service centers as members/owners

North American Steel Alliance Board of Directors announced that with the addition of five new metal service centers as member/owners of the metal distribution industry’s first and largest cooperative, the co-op continues to grow at a steady and sustainable pace. NASA’s 121 service center owners represent approximately 375 operating locations servicing metal-consuming customers across all of the US and Canada.

Monday | 16 September, 2013 | 2:46 pm

Lenox named finalist for Team Massachusetts Economic Impact Awards

MassEcon recently named LENOX, a leading manufacturer of premium band saw blades, power tool accessories and hand tools, as one of the 23 companies from across the state to have been selected as finalists for the 2013 Team Massachusetts Economic Impact Awards.

Wednesday | 11 September, 2013 | 9:44 am

Hsiang Yu Machinery to represent Jet Edge in Taiwan

Jet Edge Inc. announced that Hsiang Yu Machinery Co., Ltd. has been selected as its newest waterjet systems dealer for Taiwan, R.O.C. Hsiang Yu Machinery carries Jet Edge’s full line of waterjet cutting and surface preparation equipment, including waterjet cutting machines, waterjet intensifier pumps and portable waterjetting systems.

Monday | 09 September, 2013 | 9:28 am

GE joins forces with Thermo Fisher Scientific

GE’s Measurement and Control business is expanding its portfolio of inspection technologies through a new agreement with Thermo Fisher Scientific, a leading global supplier of analytical instruments and laboratory equipment.

Sunday | 01 September, 2013 | 12:00 am

Yarde Metals opens new facility

In June, Yarde Metals opened a 50,000-square-foot manufacturing facility in Greensboro, N.C.

Friday | 30 August, 2013 | 12:00 am

American Douglas Metals moves to larger space

American Douglas Metals, Orlando, Fla., a metal distributor, fabricator and processor, moved its Kenmore, N.Y., facility to a state-of-the-art, 80,000-square-foot space in Buffalo, N.Y.

Thursday | 29 August, 2013 | 12:35 pm

Shape the future: OMAX's 20th anniversary open house and technology event

OMAX Corporation welcomed nearly 600 customers, friends, family and special guests from across the country at SHAPE THE FUTURE: OMAX’s 20th Anniversary Open House and Technology Event. In addition to live cutting demonstrations and interactive technical sessions, the event featured tours of OMAX’s recently expanded, state-of-the-art manufacturing facility in Kent, Wash.

Company Profiles

COIL PROCESSING SAWING

Alcos Machinery

Behringer Saws Inc.

Butech Bliss

Hydmech

IMS Systems Inc.

 

Red Bud Industries Inc.

 

Tishken

 

LATEST ISSUE  
MM Cover 0516 digital

vert-current-linewhiteMay 2016

Racing form

Magnesium has had applications at Porsche for more than half a century.

> READ THIS
MONTH'S ISSUE

Instagram - @ModernMetalsMag

Modern Metals on Twitter

Banner

TrendPublishing 6 16 mm

Instagram Icon Large twitter facebook linkedin rss

MM 0516 brandingcovers