Banner
Stainless Steel
Wednesday | 18 June, 2014 | 8:09 am

The Magic of Mesh

By Lynn Stanley

Firm’s metal mesh systems fuse function with beauty

June 2014 - Persian carpet makers combined complex weaving methods with silk and wool to handcraft rugs prized for both their artistry and utilitarian uses. Similarly, Cambridge Architectural’s artisans weave metal mesh strands into intricate patterns from recyclable materials like stainless, bronze, aluminum and brass. With its custom designs, textures and finishes, this metal fabric gives architects and contractors durable, sustainable building materials that are also beautiful. 

The Cambridge, Maryland-based company is one of the largest domestic manufacturers of flexible and rigid metal mesh systems used for the interiors and exteriors of structures that include libraries, hospitals, universities, performing arts venues, hotels and major sports complexes. The juxtaposition of metal artwork and function can in part be traced to Cambridge’s industrial roots.

Established as a wire belt manufacturer in 1911, the company produced stainless conveyor belting. As its capabilities and technology evolved, Cambridge began to look for other ways to use its woven metal material. “One of our first architectural applications, interior cladding for elevators, was installed in New York City’s Seagram Building in 1957,” says Gary Compton, brand manager for Cambridge. “You can still visit that building today and see our cladding in its elevators.” 

Cambridge also helped pioneer use of its metal mesh material as an external design option for architects. In 2002 the company established the Cambridge Architectural Division.

MM-0617-webex-mesh-image1

Visual dynamics 

Today the division’s product portfolio continues to expand with the development of new mesh patterns, finishes and innovative uses. To help a customer realize a vision, Cambridge also develops new fabrication techniques and invests in the necessary equipment to build new products, like the s-shaped mesh panels it designed for the Aria Resort and Casino in Las Vegas, Nevada.

The 4,004-room Aria Resort And Casino, considered the crown jewel of an $8.5 billion CityCenter project, opened in December 2010. Cambridge was tapped by Pelli Clarke Pelli Architects, headquartered in New Haven, Connecticut, to create an economic yet visually dynamic metal mesh solution that could mask the hotel’s lush pool deck area and massive block stairs from public view. 

“Pelli Clarke Pelli wanted a curved upper façade system that could shield the area yet provide an element of transparency poolside that would not obstruct the view or hinder airflow,” says Compton. “Visually they also wanted the surface of the facade to shimmer and appear fluid, like fabric flowing across the building’s exterior.”

Cambridge chose T304 stainless steel to create a unique mesh pattern with an open area of 36 percent and a highly reflective face. The company offers a standard woven mesh product made up of spirals and rods woven to maintain a straight or flat plane. “Pelli wanted the rods to curve in an unconventional direction which required us to curve the rods themselves,” explains Matt O’Connell, a project engineer for Cambridge. “We also had to develop a new, curved attachment system we could affix the mesh to.” 

“This was a hallmark project that really illustrates the scope of what we do from development of a unique mesh pattern and attachment system to full scale engineering, project management and installation,” Compton says.

Innovation meets function

To tackle the project the Cambridge team developed a mockup 25 feet tall by 30 feet wide to include the façade’s tightest curve and a reverse s-curve to test the performance of its prototype attachment system. Cambridge rolled and formed the structural steel for the mockup which helped them develop the fabrication techniques required to produce the curved panels. 

“You can draw something on a computer,” says O’Connell, “but we also work closely with the steel contractor. Once the contractor built the framework, we went to the work site and created a template that we both could work from. The template helped us determine that we needed a 4-inch offset for top, intermediate and bottom brackets, and our patented Eclipse tubes to attach those brackets to the framework. The template also allowed the contractor to go ahead and drill the holes for the tubes.”

For Cambridge, each step of the process—from raw tubes to initial polish and fabrication of the curves to exact specifications—required meticulous attention to detail.

MM-0617-webex-mesh-image2

Thirty-four curved panels, rolled like carpet, arrived at the job site. Once the top bracket was installed, technicians would unroll a panel from the top using a crane to lift and attach it to the bracketing. Man lifts allowed technicians to work their way down the panel, attaching it at the intermediate and bottom brackets with the eclipse tubes. Tension was then applied to the specified amount of preload. “Tension is critical,” says O’Connell. “You don’t want the panel to sag or move.”

Once setup was complete, the upper façade covered 26,000 square feet and consisted of 26 stainless steel mesh panels 17 feet wide by 46 feet tall; 8 panels 17 feet wide by 39 feet high and 3 panels 18 feet wide by 46 feet high. A lower façade, covering 7,400 square feet, was made from flat mesh panels stretched between standard eye bolts to provide a lower-cost barrier.

“The upper façade was the focal point and where the customer put its’ investment,” says Compton. 

Installation for both upper and lower facades, along with mesh applications that included the parking structure, was completed in 2009 and according to Steve Jung, director of architecture for MGM Resorts International Design, the facades are holding up well. 

“We wanted a cost-effective solution that screened away the structural steel and very large exit staircase that we didn’t want to see,” he says. “According to Facilities at the Aria, they have not had to perform any service on the façade. I drove past it recently and it looks good, though it probably could use a power wash. We’re in a very dusty environment here in Las Vegas, so it doesn’t take long.”

Large spaces

Cambridge recently used the Pellican mesh developed for the Aria as part of the Cotton Bowl’s $57 million renovation. James Carpenter Design Associates selected Cambridge’s Mid-Balance and Pellican mesh patterns to create form for the Dallas, Texas-stadium’s end zones while allowing views in and out of the facility as well as air circulation. The panels [334 Mid-Balance mesh panels covering 41,120 square feet and 174 Pellican mesh panels covering 8,232 square feet] mounted in Cambridge’s Eclipse attachment system, were installed in 2013. The mix of textures creates a series of ribbons pulled inward from the top of the stadium, cinched, and then allowed to flow downward. The design, called Light Veil, was a winning concept for the New York City-based James Carpenter Design in a competition held for this portion of the project.

“For each job we do, the interaction between the architect, the contractor and our firm is critical,” says Compton. “From a metals perspective, the use of mesh and the way we attach it, allows us to cover extremely large areas to give customers something that is beautiful, appears light and transparent, yet is strong and functional.”

 

Current Issue

MM-Cover-10-14-current

October 2014

ON THE COVER: 
Gearing up for 2015
Tackling foreign policies, regulations, trade balances and capital plans, here are forecasts for virtually everything.

MM-Digital-button-current1

Subscribe: PRINT/DIGITAL MAGAZINE - eNEWSLETTERS

Midwest-MM-home-ad-5

Advertisement

Modern Metals on Twitter

White Papers

More White Papers >
Banner

Industry Partners

Alloy Bar Products

Custom Rubber Products

Metals Distribution

Service Centers

Sierra Alloys Royal Rubber Co. ThyssenKruppnMaterials NA Heidtman Steel Products

Aluminum

Cutting Software

Perforated & Expanded Metal

North American Steel Alliance
Channel Alloys SigmaTEK Systems McNichols Co. Reliance Steel & Aluminum Company

Bar

Cutting Systems

Plasma Technology

Thickness Gauges

Gerdau Messer Cutting Systems, Inc. ESAB Welding & Cutting Products Compusource Corporation

Bevelers

Drilling

Plate

Enmark Systems, Inc.
Steelmax Hougen Manufacturing, Inc. Allor Manufacturing Inc.

Stainless Steel

CNC Cutting (Plasma, Waterjet, Laser, Router)

Financial Services

Artco Group Stainless Sales Corp.
Multicam Inc. BMO Harris Bank Churchill Steel Plate Ltd Straub Metal International

Coated Coil

GE Capital Finance Ranger Steel

Stainless, Nickel, Aluminum, Pipe, Tube & Bar

American Nickeloid Metals

Investment Banking

Precision Grinding

Prudential Stainless & Alloys, L.P.
Centria Coating Services Brown Gibbons Lang & Company Joco Precision Grinding

Steel

Metal Coaters

Laser Technology

Profiling Software

ArcelorMittal

Coil Processing

AltaMAR, Inc. FastCam Pty Ltd. Central Steel Service, Inc.
Bradbury Group Amada America, Inc.

Rolled and Extruded Aluminum Products

Parker Steel Co.
Braner USA LVD Strippit Aleris Rolled Products SSAB
Burghardt + Schmidt GmbH Mitsubishi Laser-MC Machinery Systems, Inc.

Sawing Technology

Summit Steel Corporation
Butech Bliss

Machining Centers

Behringer Saws, Inc.

Steel Fabrication

Formtek-Maine Handtmann CNC Cosen International, Inc. Voortman Corporation
Herr-Voss Stamco

Material Handling

Cut Technologies Metal

Titanium

IMS Systems, Inc. Canrack Metal Center Systems DoALL Sawing Products TSI Titanium
Leveltek Samuel Strapping Systems HE&M Saw

Tooling

Machine Concepts Steel Storage Systems Inc. Kasto Carlson Tool & Manufacturing Corp.
Red Bud Industries The Caldwell Group, Inc. Metlsaw Systems

Tube & Pipe

Tishken

Metal Alloy Analysis & Verification

Sawblade.com Independence Tube Corp.

Copper & Brass

Thermo Scientific Niton Analyzers Scotchman Industries, Inc. National Tube Supply Company
Christy Metals Inc.

Metal Finishing & Deburring

Wikus Saw Technology Specialty Pipe & Tube
Farmer's Copper Supermax Tools

 

Turnkey Finishing System

 

 

 

Intellifinishing

 

 

 

Waterjet

 

 

 

TECHNI Waterjet

TrendPublishing

twitter facebook linkedin rss

 

FFJ-1114-brandingcovers