December 9, 2021 - Alliance Steel added an additional slitting line to its lineup of in-house slitters. The steel service center adds a Paxson/Braner .250 in. by 24 in. narrow slitting line.
December 9, 2021 - Earlier this month, Alliance Steel LLC, Gary, Indiana, added an additional slitting line to its lineup of in-house slitters. The steel service center adds a Paxson/Braner .250 in. by 24 in. narrow slitting line to complete their trifecta. The addition of this line places Alliance Steel in a unique position to supply narrow slit coils with tight width tolerances.
“It is important for Alliance Steel and our customer base to offer as many products and services as possible. Therefore, our team felt that it was necessary to add narrow coil slitting capacity to our already robust arsenal of equipment capabilities,” says Drew Gross, corporate vice president.
This precision slitting line, rebuilt in 2021, is equipped with a power-driven head, 16 ft. looping pit for camber–free material, and a tension stand for an exceptional quality product.
Additional Capabilities:
· Material Type: HRPO, HR, CR, COATED
· Material Thickness: .020 in. - .250 in.
· Slit Width: .625 in. – 24.00 in.
· Min/Max ID: 20 in.
· Max OD: 60 in.
· Max Coil Weight on Entry: 15,000 lb.
· Max Coil Weight on Exit: 10,000 lb.
· Edge Trim: .187 in. each side
Precision Slitting creates opportunities for industries that require narrow cuts, such as multi-slide stamping, power generation, infrastructure, tubing, and many more.
“With the ability to slit nearly half an inch in width, there are literally no industries we cannot service or provide for out of our state-of-the-art headquarters in Gary, Indiana,” Gross added.
Alongside the 24 in. slitter, Alliance Steel has two additional slitting lines, including a heavy-gauge slitter (.500 in. by 84 in.) and a .010 in. by 72 in. coil slitter.
Alliance Steel is a flat rolled, coil processing steel service center in Gary, Indiana. We have been a flat-roll steel supply and coil processing leader for over 20 years. In May 2020, we relocated to Gary, Indiana, strategically placing ourselves near significant highways, mills, and ports. There are also two sales locations in the Mid- South (Atlanta and Memphis).
Our temperature-controlled 300,000 square foot facility is equipped with full rail service, multiple slitters, including a heavy-gauge line, numerous fiber lasers, multi–blanking, cut to length, stretcher leveling, and metallurgical capabilities. Alliance Steel is prepared to support your steel needs with an extensive inventory of flat-rolled sheet and coil products.
For More information, please visit AllianceSteel.net or call 219.427.5400
