Banner

Products

Mazak launches FT-150 FIBER laser-cutting machine for small to medium diameter tubes

July 2, 2020 - The FT-150 FIBER tube-cutting laser has been designed for high-speed cutting and reduced non-cutting process to improve cycle times for small to medium diameter tubes.

High production SMART tube/wire bender can run autonomously

June 29, 2020 - BLM GROUP USA’s SMART Bender is an all-electric CNC bending machine for wires and tubes up to 1.1 in. (28mm) with a compact layout and a wide range of loading/unloading options that enables non-stop operation and the capability to run without a dedicated operator.

Constellium announced the expansion of its portfolio of advanced aluminum solutions with the launch of Aheadd

June 24, 2020 - Constellium SE announced the expansion of its portfolio of advanced aluminium solutions with the launch of Aheadd®, a new offer for high performance aluminium powders that exceed industry standards for additive manufacturing productivity and component properties.

noax boosts WLAN in logistics computers

June 17, 2020 - Excellent WLAN reception is vital for reliable and uninterrupted operations in warehouses and logistics. noax logistics computers offer wide coverage and the highest security in data transfer with the support of current WLAN standards. Optimized antenna technology transmits signals to every corner.

Ultra-Cut 130 XT High-Precision Plasma Power Source Offers 30 Percent More Power, Cuts 20 Percent Faster

June 15, 2020 - Thermal Dynamics Automation has introduced the Ultra-Cut 130 XT high-precision plasma power source and new 130-amp XT torch and consumables. The system has a cutting output of 130 amps at 100 percent duty cycle and is optimized for piercing and cutting 3/4 in. steel, stainless and aluminum.

LVD Strippit introduces MOVit line of automation systems for lasers

June 15, 2020 - LVD Strippit introduces MOVit, a comprehensive range of automation systems, including new TAS (Tower Automation System) and WAS (Warehouse Automation System) options for LVD Phoenix and Electra laser cutting machines. MOVit systems also include LVD’s Compact Tower, Flexible Automation and Load-Assist.

Axalta expands industrial product portfolio with launch of Strenex

June 8, 2020 - Axalta launched its Strenex industrial product line for general industrial, construction, and fabrication. Strenex expands the company's industrial portfolio and enables entry into the light and medium industrial markets throughout North America.

Coldwater Machine announces automated tube/bar straightening system

June 2, 2020 - Coldwater Machine has announced the availability of its automated, all-servo-controlled Tube and Bar Straightening System for carbon steel, stainless, aluminum, copper, brass and other materials.

Buffing wheels achieve superior results and long life

May 29, 2020 - Saint-Gobain Abrasives announced the introduction of its new, innovative Norton FAB (Fixed Abrasive Buff) buffing wheels that virtually eliminate the need to use buffing compounds.

WALTER offers time-saving tool cleaning and laser marking modules

May 21, 2020 - To further increase efficiency of the manufacture and final inspection of cutting tools, WALTER HELICHECK PLUS and HELICHECK PRO machines from UNITED GRINDING North America now feature new modules for tool cleaning and laser marking.

Magnetic drill is safer with less maintenance

May 19, 2020 - Hougen Manufacturing Inc., Swartz Creek, Michigan, has released a new and improved HMD904 portable magnetic drill. The HMD904 with its powerful performance, lightweight size, small footprint and hole capacity is the most popular model in the line of Hougen magnetic drills.

Glebar Co. delivers solution to thrufeed grind steel tubes

May 12, 2020 - Innovative precision grinding machine solution provider Glebar Company recently delivered a solution to thrufeed grind steel tubes while also decreasing downtime and maintaining a high-quality part.

Rapid stock removal with low roughness average

May 12, 2020 - Cotton Fiber Max Mounted Points are manufactured with extra aluminum oxide grain in a specially formulated bond and can reduce grinding steps for various fabrication applications.

Laser interferometer provides precise and fast measurement

May 11, 2020 - To be able to produce perfect and precise products, high-quality production facilities are an absolute must have. To achieve this, CNC machines and CMM machines must guarantee the highest accuracy. With the Status Pro µLine laser interferometer, regular checks and compensations can be performed quickly and easily to inspire maximum confidence among your customers.

Metal Networks.AI e-Commerce Search Engine Becomes Smarter + Faster

May 5, 2020 - Metal Networks.AI is pleased to announce that its AI-powered JAQI® search engine’s patent-pending technology makes it faster and easier than ever before to find unfinished and semi-finished metal products in electronic catalogues or inventory databases for e-Commerce sites and quoting systems.

Automatic Feed announces drives and controls upgrades that result in energy savings

May 5, 2020 - Automatic Feed Company announces its drives and controls upgrades for coil processing equipment, which increase production output while lowering energy usage and costs. One customer’s recent switch from DC to AC drives on their cut-to-length line and stacking equipment has achieved a 76% cost and power consumption savings.

TAB Industries introduces dual control boxes for safe, convenient access

April 21, 2020 - Offered as an option, the dual control boxes are set on both sides of the wrapping machine to allow safe, quick, convenient access when operating in manual mode without requiring movement around the length of the system's built-in conveyors.

ESAB's new SmartPipe cutting system offers affordable automated pipe cutting option

April 21, 2020 - ESAB Welding & Cutting Products has introduced its new SmartPipe™ system for automated plasma or oxy-fuel cutting of pipe alongside a table for cutting flat plate. The SmartPipe standard line covers pipe in diameters from 2 to 12 in., lengths up to 20 ft. and weights up to 2,200 lbs.

BLM GROUP enhances LT Fiber EVO and LT722 with active tools for dynamic process optimization

April 21, 2020 - BLM GROUP has enhanced its LT Fiber EVO and CO2-type LT722D automatic laser cutting systems, which process special sections and open shapes up to 6.0 in. (152.4 mm) diameter, with Active Tools.

Emuge Corp. introduces new generation of taps for hardened steel, cast iron materials

April 15, 2020 - Emuge Corp. announced the introduction of its A-H family of taps, a new generation of Premium HSS-E and HSSE-PM Taps for hardened steel and cast iron materials.

Multi-profile cutting machine is a versatile flexible solution for difficult times

March 30, 2020 - HGG’S newest Multi-Profile Cutting Machine (MPC 450 2.0) provides a cost-effective and flexible solution for manufacturers that can no longer justify a dedicated machine for pipe profiling alone. The highly accurate 3D MPC 450 2.0 combines three machines into one versatile and flexible solution.

Starrett introduces high throughput rotary table springs force tester

March 25, 2020 - The Rotary Table Springs Force Tester system is setup to test multiple springs in a single setup without the need for additional operator input as required when springs are tested one by one.

Updated ESAB Weld Productivity Analyzer tool enables fast report generation and editing

March 23, 2020 - ESAB Welding & Cutting Products has updated its Quick Weld Productivity Analyzer, an easy-to-use calculator for total weld cost analysis, so users can generate a PDF report.

Cor-Pak 1-MUL Pouches are now available in 8- MUL format

March 16, 2020 - Cortec Corporation announced that its popular and convenient Cor-Pak® 1-MUL Pouches are now available in 8- MUL format for eight times the corrosion protection volume previously offered.

Plasma torch upgrades mechanized plasma cutting

March 11, 2020 - American Torch Tip’s PHDX torch lines is now available as a Retrofit for Kaliburn, Lincoln, Spirit, and Proline Mechanized plasma System.

6
Page 6 of 29
LATEST ISSUE 
Cover MM1122 v3

vert-current-linewhiteNOVEMBER 2022

END USER OUTLOOK 2023
Despite whispers of recession, manufacturers run full out.




0722 Industry Scope SW Modern Metals 330x285

Enmark 333x100 Banner

Modern Metals on Twitter

Banner

Company Profiles

AIR FILTRATION

DEBURRING/FINISHING

NESTING SOFTWARE

SOFTWARE

Camfil APC - Equipment ATI Industrial Automation Metamation Inc. 4GL Solutions
Camfil APC - Replacement Filters Lissmac Corp.

PLASMA TECHNOLOGY

Enmark Systems Inc.

ALUMINUM

Osborn Messer Cutting Systems Inc. Lantek Systems Inc.
Richardson Metals, Inc. Supermax Tools

PLATE

SecturaSOFT

BEVELING

Timesavers Churchill Steel Plate SigmaTEK Systems LLC
Steelmax Tools LLC

IRONWORKERS

Peddinghaus

STAINLESS STEEL

COIL PROCESSING

Trilogy Machinery Inc.

PLATE & ANGLE ROLLS

Heyco Metals
ANDRITZ Metals USA Inc.

LASER TECHNOLOGY

Trilogy Machinery Inc.

STEEL

Braner USA Inc. AMADA AMERICA Inc.

PRESS BRAKE TOOLING

Alliance Steel
Burghardt + Schmidt Group MC Machinery Systems Inc. Rolleri USA North American Steel Alliance
Butech Bliss TRUMPF Inc.

PRESS BRAKES

TITANIUM

Red Bud Industries

MATERIAL HANDLING

MC Machinery Systems Inc. STS Metals
The Bradbury Group EMH Crane

PUNCHING

TUBE & PIPE

Tishken Fehr Warehouse Solutions Inc. Hougen Manufacturing BLM Group

CONVEYOR SYSTEMS

Steel Storage Systems

SAWING

HGG Profiling Equipment Inc.
Mayfran International UFP Industrial Advanced Machine & Engineering Prudential Stainless & Alloys

COPPER & BRASS

MEASUREMENT & QUALITY CONTROL

Behringer Saws Inc.

WATERJET TECHNOLOGY

Concast Metal Products Co. Advanced Gauging Technologies Cosen Saws Barton International
Copper and Brass Servicenter Association

METAL FABRICATING MACHINERY

DoALL Sawing Products Jet Edge Waterjet Systems
Farmers Copper Cincinnati Inc. HE&M Saw Omax Corp.
  LVD Strippit Savage Saws

ZINC

  Scotchman Industries

SERVICE CENTERS

Jarden Zinc Products
  Trilogy Machinery Inc. Admiral Steel  
    Alliance Steel  

TPMG2022 Brands


BPA_WW_MASTER.jpg